-
挡圈
- 锥销锁紧挡圈
Lock rings with cone pin
GB 883-86
| UDC 621.885 | 代替GB 883-76 - 螺钉锁紧挡圈
Lock ring with screw
GB 884-86
| UDC 621.885 | 代替GB884-76 - 带锁圈的螺钉锁紧挡圈
Lock rings with screw and circlip
GB 885-86
| UDC 621.885 | 代替GB 885-76 - 轴肩挡圈
Rings for shoulder
GB 886-86
| UDC 621.885 | 代替GB 886-76 - 螺钉紧固轴端挡圈
Lock rings at the end of shaft with screw
GB 891-86
| UDC 621.885 | 代替GB 891-76 - 螺栓紧固轴端挡圈
Lock rings at the end of shaft with bolt
GB 892-86
| UDC 621.885 | 代替GB 892-76 - 孔用弹性挡圈-A型
Circlips for holes-type A
GB 893.1-86
| UDC 621.885 | 代替GB893-76 - 孔用弹性挡圈-B型
Circlips for hole-type B
GB 893.2-86
| UDC 621.885 - 轴用弹性挡圈-A型
Circlips for shaft-type A
GB 894.1-86
| UDC 621.885 | 代替GB 894-76 - 轴用弹性挡圈-B型
Circlips for shaft-type B
GB 894.2-86
| UDC 621.885 - 孔用钢丝挡圈
Roundwire snap rings for hole
GB 895.1-86
| UDC 621.885 | 代替GB 895-76（有关部分） - 轴用钢丝挡圈
Roundwire snap rings for shaft
GB 895.2-86
| UDC 621.885 | 代替GB 895-76（有关部分） - 开口挡圈
E-rings
GB 896-86
| UDC 621.885 | 代替GB 896-76 - 钢丝锁圈
Round wire circlips
GB 921-86
| UDC 621.885 | 代替GB 921-76 - 夹紧挡圈
Grip rings
GB 960-86
| UDC 621.885 | 代替GB960-76
-
螺栓
- 方头螺栓 C级
Square head bolts-Product grade C
GB 8-88
| UDC 621.882.6 | 代替GB 8-76 - 沉头方颈螺栓
Flat countersunk square neck bolts
GB 10-88
| UDC 621.882.6 | 代替GB 10-76 - 沉头带榫螺拴
Flat countersunk nib bolts
GB 11-88
| UDC 621.882.6 | 代替GB 11-76 - 半圆头方颈螺栓
Cup head square neck bolts
GB 12-88
| UDC 621.882.6 | 代替GB 12-76 - 半圆头带榫螺栓
Cup head nid bolts
GB 13-88
| UDC 621.882.6 | 代替GB 13-76 - 大半圆头方颈螺栓 C级
Cup head square neck bolts with large head-Product grade C
GB/T 14-1998
| 代替GB14-88 - 大半圆头带榫螺栓
Cup head nib bolts with large head
GB 15-88
| UDC 621.882.6 | 代替GB 15-76 - 六角头铰制孔用螺栓 A和B级
Hexagon fit bolts-product grade A and B
GB 27-88
| UDC 621.882.6 | 代替GB 27-76 - 六角头螺杆带孔铰制孔用螺栓 A 和 B 级
Hexagon fit bolts with split pin hole on shank-product grade A and B
GB 28-88
| UDC 621.882.6 | 代替GB 28-76 - 六角头头部带槽螺栓 A 和 B 级
Hexagon bolts with slot on head -product A and B
GB 29.1-88
| UDC 621.882.6 | 代替GB 29-76 - 十字槽凹穴六角头螺栓
Cross recessed hexagon bolts with indentation
GB 29.2-88
| UDC 621.882.6 | 代替GB 29-76 - 六角头螺杆带孔螺栓 A 和 B 级
Hexagon bolts with split pin hole on shank-product grade A and B
GB 31.1-88
| UDC 621.882.6 | 代替GB31、23、24-76 - 六角头螺杆带孔螺栓 细杆 B级
Hexagon bolts with split pin hole on shank-Reduced shank-product grade B
GB 31.2-88
| UDC 621.882.6 | 代替GB 31、23、24-76 - 六角头螺杆带孔螺栓 细牙 A和B级
Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B
GB 31.3-88
| UDC 621.882.6 | 代替GB 31、23、24-76 - 六角头头部带孔螺栓 A 和 B级
Hexagon bolts with wire holes on head-product grade A and B
GB 32.1-88
| UDC 621.882.6 | 代替GB 32、25、26-76 - 六角头头部带孔螺栓 细杆 B级
Hexagon bolts with wire holes on head-Reduced shank-product grade B
GB 32.2-88
| UDC 621.882.6 | 代替GB 32、25、26-76 - 六角头头部带孔螺栓 细牙 A 和 B 级
Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B
GB 32.3-88
| UDC 621.882.6 | 代替GB 32、25、26-76 - 小方头螺栓 B级
Square head bolts with small head-praduct grade B
GB 35-88
| UDC 621.882.6 | 代替GB 35-76 - T 形槽用螺栓
Bolts for T-Slot
GB 37-88
| UDC 621.882.6 | 代替GB 37-76 - 加强半圆头方颈螺栓
Strengthened cup head square neck bolts
GB /T 794-93
| 代替GB 794-67 - 活节螺栓
Eye bolts
GB 798-88
| UDC 621.882.6 | 代替GB 798-76 - 地脚螺栓
Eyelet bolts
GB 799-88
| UDC 621.882.6 | 代替GB 799-76 - 沉头双榫螺
Flat countersunk double nib bolts
GB 800-88
| UDC 621.882.6 | 代替GB 800-77 - 小半圆头低方颈螺栓 B级
Cup head square neck bolts with small head and short neck-product grade B
GB /T 801-1998
| 代替GB 801-88 - 六角头螺栓 C级
Hexagon head bolts-product grade C
GB /T 5780-2000
| 代替GB /T 5780-1986 - 六角头螺栓 全螺纹 C级
Hexagon head bolts-Full thread-product grade C
GB /T 5781-2000
| 代替GB /T 5781-1986 - 六角头螺栓
Hexagon head bolts
GB /T 5782-2000
| 代替GB /T 5782-1986 - 六角头螺栓 全螺纹
Hexagon head bolts-Full thread
GB /T 5783-2000
| 代替GB /T 5783-1986 - 六角头螺栓-细杆-B级
Hexagon head bolts-Reduced shank -Product grade B
GB 5784-86
| UDC 621.882.6 | 代替GB 30、21-76 - 六角头螺栓 细牙
Hexagon head bolts with fine pitch thread
GB /T 5785-2000
| 代替GB /T 5785-1986 - 六角头螺栓 细牙 全螺纹
Hexagon head bolts with fine pitch thread-Full thread
GB /T 5786-2000
| 代替GB /T 5786-1986 - 六角法兰面螺栓-加大系列-B级
Hexagon flange bolts-Heavy series-product grade B
GB 5789-86
| UDC 621.882.6 - 六角法兰面螺栓-加大系列-细杆-B级
Hexagon flange bolts-Heavy series-product grade B
GB 5790-86
| UDC 621.882.6 - 六角法兰面螺栓 小系列
Hexagon flange bolts-Small series
GB /T 16674-1996
| 代替GB /T 5787、5788-1986 - 钢网架螺栓球节点用高强度螺栓
High strength bolts for joints of space grid structures
GB /T 16939-1997
-
紧固件-组合件和连接副
- 钢结构用高强度大六角头螺栓
High strength bolts with large hexagon head for steel structures
GB /T 1228-91
| 代替GB 1228-84 - 钢结构用高强度大六角头螺母
High strength large hexagon nuts for steel structures
GB /T 1229-91
| 代替GB 1229-84 - 钢结构用高强度垫圈
High strength plain washers for steel structures
GB/T 1230-91
| 代替GB 1230-84 - 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件
Specifications of high strength bolts with large hexagon head，large hexagon nuts，plain washers for steel structures
GB/T 1231-91
| 代替GB 1231-84 - 钢结构用扭剪型高强度螺栓连接副
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB /T 3632-1995
| 代替GB 3632-83 - 钢结构用扭剪型高强度螺栓连接副 技术条件
Technical reqirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T 3633-1995
| 代替GB 3633-83 - 螺栓或螺钉和平垫圈组合件
Bolt or screw and washer assemblies with plain washers
GB /T 9074.1-2002
| 代替GB/T 9074.1、9074.14-1988 - 十字槽头螺钉和外锯齿锁紧垫圈组合件
Cross recessed pan head screw and serrated lock washer external teeth assemblies
GB 9074.2-88
| UDC 621.882 - 十字槽盘头螺钉和弹簧垫圈组合件
Cross recessed pan head screw and single coll spring lock washer assemblies
GB 9074.3-88
| UDC 621.882 - 十字槽盘头螺钉、弹簧垫圈和平垫圈组合件
Cross recessed pan head screw, single coil spring lock washer assemblies
GB 9074.4-88
| UDC 621.882 - 十字槽小盘头螺钉和平垫圈组合件
Cross recessed small pan head screw and small plain washer assemblies
GB 9074.5-88
| UDC 621.882 - 十字槽小盘头螺钉和大垫圈组合件
Cross recessed small pan head screw and big plain washer assemblies
GB 9074.6-88
| UDC 621.882 - 十字槽小盘头螺钉和弹簧垫圈组合件
Cross recessed small pan head screw and single coil spring lock washer assemblies
GB 9074.7-88
| UDC 621.882 - 十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件
Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies
GB 9074.8-88
| UDC 621.882 - 十字槽沉头螺钉和锥形锁紧垫圈组合件
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB 9074.9-88
| UDC 621.882 - 十字槽半沉头螺钉和锥形锁紧垫圈组合件
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB 9074.10-88
| UDC 621.882 - 十字槽凹穴六角头螺栓和平垫圈组合件
Cross recessed hexagon bolt with indentation and plain washer assemblies
GB 9074.11-88
| UDC 621.882 - 十字槽凹穴六角头螺栓和弹簧垫圈组合件
Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies
GB 9074.12-88
| UDC 621.882 - 十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件
Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies
GB 9074.13-88
| UDC 621.882 - 六角头螺栓和弹簧垫圈组合件
Hexagon head bolt and single coil spring lock washer assemblies
GB 9074.15-88
| UDC 621.882 - 六角头螺栓和外锯齿锁紧垫圈组合件
Hexagon head bolt and serrated lock washer external teeth assemblies
GB 9074.16-88
| UDC 621.882 - 六角头螺栓、弹簧垫圈和平垫圈组合件
Hexagon head bolt,single coil spring lock washer and plain washer assemblies
GB 9074.17-88
| UDC 621.882 - 自攻螺钉和平垫圈组合件
Tapping screw and washer assemblies with plain washers
GB /T 9074.18-2002
| 代替GB/T 9074.18、9074.19、9074.22、9074.23-1988 - 十字槽凹穴六角头自攻螺钉和平垫圈组合件
Cross recessed hexagon head tapping screw with indentation and plain washer assemblies
GB 9074.20-88
| UDC 621.882 - 十字槽凹穴六角头自攻螺钉和大垫圈组合件
Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies
GB 9074.21-88
| UDC 621.882 - 组合件用弹簧垫圈
Single coil spring lock washer for assembly
GB 9074.26-88
| UDC 621.882 - 组合件用外锯齿锁紧垫圈
Serrated lock washer external teeth for assembly
GB 9074.27-88
| UDC 621.882 - 组合件用锥形锁紧垫圈
Lountersunk external toothed lock washer for assembly
GB 9074.28-88
| UDC 621.882 - 腰状杆螺柱连接副型式分类
Connections with waisted stud-Tape classification
GB /T 13807.1-92
- 腰状杆螺柱连接副螺柱
Connections with waisted stud-Studs
GB/T 13807.2-92
- 腰状杆螺柱连接副螺母、受力套管
Connections with waisted stud-Nuts,extension sleeves
GB/T 13807.3-92
- 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级
Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9
GB/T 18230.1-2000
- 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8和 10.9级
Hexagon bolts for high-strengthstructural bolting with large width across flats(short thread length)-Product grade C-property classes 8.8 and 10.9
GB/T 18230.2-2000
- 栓接结构用大六角头螺母 B级 8和10级
Hexagon nuts for high-strength structural bliting with large width across flats-Product grade B-Property classes 8 and 10
GB/T 18230.3-2000
- 栓接结构用1型大六角螺母 B级 10级
Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10
GB/T 18230.4-2000
- 栓接结构用平垫圈 淬火并回火
Plain washers for high-strength structural bolting hardened and tempered
GB/T 18230.5-2000
- 栓接结构用1型大六角螺母浸热 镀锌(加大攻丝尺寸) A和B级 5.6和8级
Hexagon nuts for structural bolting,style 1,hot-dip galvanized(oversize tapped)-Product grade A and B-Property classes 5.6 and 8
GB/T 18230.6-2000
- 栓接结构用2型大六角螺母浸热 镀锌(加大攻丝尺寸) A级 9级
Hexagon nuts for structural bolting,style 2,hot-dip galvanized(oversize tapped)-Product grade A -Property class 9
GB/T 18230.7-2000
-
铆钉
- 平头铆钉
Flat head rivets
GB 109-86
| UDC 621.884 | 代替GB109-76 - 标牌铆钉
Rivets for name plate
GB 827-86
| UDC 621.884 | 代替GB827-76 - 半圆头铆钉(粗制)
Round head rivets-Black
GB 863.1-86
| UDC 621.884 | 代替GB863-76 - 小半圆头铆钉(粗制)
Round head rivets with small head-Black
GB 863.2-86
| UDC 621.884 - 平锥头铆钉(粗制)
Cone head rivets-Black
GB 864-86
| UDC 621.884 | 代替GB864-76 - 沉头铆钉(粗制)
Countersunk head rivets-Black
GB 865-86
| UDC 621.884 | 代替GB 865-76 - 半沉头铆钉(粗制)
Oval countersunk head rivets-Black
GB 866-86
| UDC 621.884 | 代替GB866-76 - 半圆头铆钉
Round head rivets
GB 867-86
| UDC 621.884 | 代替GB 867-76 - 平锥头铆钉
Cone head rivets
GB 868-86
| UDC 621.884 | 代替GB 868-76 - 沉头铆钉
Countersunk head rivets
GB 869-86
| UDC 621.884 | 代替GB 869-76 - 半沉头铆钉
Oval countersunk head rivets
GB 870-86
| UDC 621.884 | 代替GB 870-76 - 扁圆头铆钉
Flat round head rivets
GB 871-86
| UDC 621.884 | 代替GB 871-76 - 扁平头铆钉
Thin head rivets
GB 872-86
| UDC 621.884 | 代替GB 872-76 - 扁圆头半空心铆钉
Oval head semi-tubular rivets
GB 873-86
| UDC 621.884 | 代替GB 873-76 - 120°沉头半空心铆钉
120 degree countersunk head semi-tubular rivets
GB 874-86
| UDC 621.884 | 代替GB 874-76 - 扁平头半空心铆钉
Thin head semi-tubular rivets
GB 875-86
| UDC 621.884 | 代替GB 875-76 - 空心铆钉
Tubular rivets
GB 876-86
| UDC 621.884 | 代替GB 876-76 - 120°沉头铆钉
120 degree countersunk head rivets
GB 954-86
| UDC 621.884 | 代替GB 954-76 - 管状铆钉
Pipe type rivets
GB 975-86
| UDC 621.884 | 代替GB 975-76 - 大扁圆头铆钉
Truss head rivets
GB 1011-86
| UDC 621.884 | 代替GB 1011-76 - 120°半沉头铆钉
120 degree oval countersunk rivets
GB 1012-86
| UDC 621.884 | 代替GB 1012-76 - 平锥头半空心铆钉
Cone head semi-tubler rivets
GB 1013-86
| UDC 621.884 | 代替GB 1013-76 - 大扁圆头半空心铆钉
Truss head semi-tublar rivets
GB 1014-86
| UDC 621.884 | 代替GB 1014-76 - 沉头半空心铆钉
Countersunk head semi-tublar rivets
GB 1015-86
| UDC 621.884 | 代替GB1015-76 - 无头铆钉
Headless rivets
GB 1016-86
| UDC 621.884 | 代替GB 1016-76 - 封闭型扁圆头抽芯铆钉
Mushroom head break mandrel closed end blind rivets
GB 12615-90
- 封闭型沉头抽芯铆钉
120 deg flush head break mandrel closed end blind rivets
GB 12616-90
- 开口型沉头抽芯铆钉
120 deg flush head break mandrel blind rivets
GB 12617-90
- 开口型扁圆头抽芯铆钉
Mushroom head break mandrel blind rivets
GB 12618-90
- 扁圆头击芯铆钉
Flat round head drive rivets
GB /T 15855.1-1995
- 沉头击芯铆钉
Countersunk head drive rivets
GB /T 15855.2-1995
-
销
- 开口销
Split pins
GB /T 91-2000
| 代替GB/T 91-1986 - 圆锥销
Taper pins
GB /T 117-2000
| 代替GB/T 117-1996 - 内螺纹圆锥销
Taper pins with internal thread
GB /T 118-2000
| 代替GB/T 118-1986 - 圆柱销 淬硬钢和马氏体不锈钢
Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)
GB /T 119.2-2000
| 代替GB/T 119-1986 - 内螺纹圆柱销 不淬硬钢和奥氏体不锈钢
Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
GB /T 120.1-2000
| 代替GB/T 120-1986（有关部分） - 内螺纹圆柱销 淬硬钢和马氏体不锈钢
Parallel pins with internal thread,of hardened steel and martensitic stainless steel
GB /T 120.2-2000
| 代替GB/T 120-1986（有关部分） - 开尾圆锥销
Taper pins with split
GB 877-86
| UDC 621.886 | 代替GB 877-76 - 螺纹圆柱销
Parallel pins with external thread
GB 878-86
| UDC 621.886 | 代替GB 878-76 - 弹性圆柱销 直槽 重型
Spring-type straight pins-Slotted, heavy duty
GB /T 879.1-2000
| 代替GB/T 879-1986 - 弹性圆柱销 直槽 轻型
Spring-type straight pins-Slotted,light duty
GB /T 879.2-2000
- 弹性圆柱销 卷制 重型
Spring-type straight pins-Coiled,heavy duty
GB /T 879.3-2000
- 弹性圆柱销 卷制 标准型
Spring-type straight pins-Coiled,standard duty
GB /T 879.4-2000
- 弹性圆柱销 卷制 轻型
Spring-type straight pins-Coiled,light duty
GB /T 879.5-2000
- 带孔销
Pins with split pin hole
GB 880-86
| UDC 621.886 | 代替GB 880-76 - 螺尾锥销
Taper pins with external thread
GB /T 881-2000
| 代替GB/T 881-1986 - 销轴
Clevis pins with head
GB 882-86
| UDC 621.886 | 代替GB882-76 - 槽销 平行沟槽
Crooved pins-Parallel grooved
GB /T 13829.1-92
- 槽销 锥槽
Crooved pins-taper grooved
GB /T 13829.2-92
- 槽销 圆头 沉头
Grooved pins-with round head or countersunk head
GB /T 13829.3-92
- 圆柱销 不淬硬钢和奥氏体不锈钢
Parallel pins,of unhardened steel and austenitic stainless steel
GB /T 119.1-2000
| 代替GB /T 119-1986
-
自攻螺钉
- 十字槽盘头自攻螺钉
Cross recessed pan head tapping screws
GB 845-85
| UDC 621.882.216.5.082.8 | 代替GB845-76 - 十字槽沉头自攻螺钉
Cross recessed countersunk head tapping screws
GB 846-85
| UDC 621.882.216.5.082.8 | 代替GB846-76 - 十字槽半沉头自攻螺钉
Cross recessed raised countersunk head tapping screws
GB 847-85
| UDC 621.882.216.5.082.8 | 代替GB847-76 - 开槽盘头自攻螺钉
Slotted pan head tapping screws
GB 5282-85
| UDC 621.882.215.082.8 - 开槽沉头自攻螺钉
Slotted countersunkhead tapping screws
GB 5283-85
| UDC 621.882.215.082.8 - 开槽半沉头自攻螺钉
Slotted raised countersunkhead tapping screws
GB 5284-85
| UDC 621.882.215.082.8 - 六角头自攻螺钉
Hexagon head tapping screws
GB 5285-85
| UDC 621.882.215.082.8 - 十字槽盘头自攻锁紧螺钉
Cross recessed pan head thread forming screws
GB 6560-86
| UDC 621.882 - 十字槽沉头自攻锁紧螺钉
Cross recessed countersunk head thread forming screws
GB 6561-86
| UDC 621.882 - 十字槽半沉头自攻锁紧螺钉
Cross recessed raised countersunk head thread forming screws
GB 6562-86
| UDC 621.882 - 六角头自攻锁紧螺钉
Hexagon head thread forming screws
GB 6563-86
| UDC 621.882 - 内六角花形圆柱头自攻锁紧螺钉
Hexagon lobular socket thread forming screws
GB 6564-86
| UDC 621.882 - 十字槽头凹穴六角头自攻螺钉
Cross recessed hexagon head tapping screws with indentation
GB 9456-88
| UDC 621.882.2 - 精密机械用紧固件十字槽自攻螺钉 刮削端
Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point
GB /T 13806.2-92
- 墙板自攻螺钉
Dry wall screws
GB /T 14210-93
- 十字槽盘头自钻自攻螺钉
Cross recessed pan head drilling screws with tapping screw thread
GB /T 15856.1-2002
| 代替GB/T 15856.1-1995 - 十字槽沉头自钻自攻螺钉
Cross recessed countersunk head drilling screws with tapping screw thread
GB /T 15856.2-2002
| 代替GB/T 15856.2-1995 - 十字槽半沉头自钻自攻螺钉
Cross recessed raised countersunk head drilling screws with tapping screw thread
GB /T 15856.3-2002
| 代替GB/T 15856.3-1995 - 六角法兰面自钻自攻螺钉
Hexagon flange drilling screws with tapping screw thread
GB /T 15856.4-2002
| 代替GB/T 15856.4-1995 - 六角凸缘自钻自攻螺钉
Hexagon washer head drilling screws with tapping screw thread
GB /T 15856.5-2002
- 六角凸缘自攻螺钉
Hexzgon head tapping screws with collar
GB /T 16824.1-1997
- 六角法兰面自攻螺钉
Hexagon flange head tapping screws
GB /T 16824.2-1997
-
木螺钉
- 开槽圆头木螺钉
Slotted round head wood screws
GB 99-86
| UDC 621.882.2 | 代替GB99-76 - 开槽沉头木螺钉
Slotted countersunk head wood screws
GB 100-86
| UDC 621.882.2 | 代替GB100-76 - 开槽半沉头木螺钉
Slotted raised countersunk head wood screws
GB 101-86
| UDC 621.882.2 | 代替GB101-76 - 六角头木螺钉
Hexagon head wood screws
GB 102-86
| UDC 621.882.2 | 代替GB102-76 - 十字槽圆头木螺钉
Cross recessed round head wood screws
GB 950-86
| UDC 621.882.2 | 代替GB950-76 - 十字槽沉头木螺钉
Cross recessed countersunk head wood screws
GB 951-86
| UDC 621.882.2 | 代替GB951-76 - 十字槽半沉头木螺钉
Cross recessed raised head countersunk head wood screws
GB 952-86
| UDC 621.882.2 | 代替GB952-76
-
垫圈
- 标准型弹簧垫圈
Single coil spring lock washers Normal type
GB 93-87
| UDC 621.882.4 | 代替GB 93-76 - 平垫圈 C级
Plain washers-Product grade C
GB /T 95-2002
| 代替GB /T 95-1985 - 大垫圈 A级
Plain washers-Large series-Product grade A
GB /T 96.1-2002
| 代替GB /T 96-1985（有关部分） - 大垫圈 C级
Plain washers-Large series-Product grade C
GB /T 96.2-2002
| 代替GB /T 96-1985（有关部分） - 平垫圈 A级
Plain washers-Product grade A
GB /T 97.1-2002
| 代替GB /T 97.1-1985 - 平垫圈 倒角型 A级
Plain washers,chamfered-Product grade A
GB /T 97.2-2002
| 代替GB /T 97.2-1985 - 销轴用平垫圈
Plain washers for clevis pins
GB /T 97.3-2000
- 平垫圈 用于螺钉和垫圈组合件
Plain washers for screw and washer assemblies
GB /T 97.4-2002
| 代替GB /T 9074.24、9074.25-1988 - 平垫圈 用于自攻螺钉和垫圈组合件
Plain washers for tapping screw and washer assemblies
GB /T 97.5-2002
| 代替GB/T 9074.29、9074.30-1988 - 小垫圈 A级
Plain washers-small series-Product grade A
GB /T 848-2002
| 代替GB /T 848-1985 - 球面垫圈
Washers with ball face
GB 849-88
| UDC 621.882.4 | 代替GB 849-76 - 锥面垫圈
Washers with cone face
GB 850-88
| UDC 621.882.4 | 代替GB 850-76 - 开口垫圈
Washers with split
GB 851-88
| UDC 621.882.4 | 代替GB 851-76 - 工字钢用方斜垫圈
Square taper washers for I section
GB 852-88
| UDC 621.882.4 | 代替GB 852-76 - 槽钢用方斜垫圈
Square taper washers for slot section
GB 853-88
| UDC 621.882.4 | 代替GB 853-76 - 单耳止动垫圈
Tab washers with long tab
GB 854-88
| UDC 621.882.4 | 代替GB 854-76 - 双耳止动垫圈
Tab washers with long tab and wing
GB 855-88
| UDC 621.882.4 | 代替GB 855-76 - 外舌止动垫圈
External tab washers
GB 856-88
| UDC 621.882.4 | 代替GB 856-76 - 圆螺母用止动垫圈
Tab washers for round nut
GB 858-88
| UDC 621.882.4 | 代替GB 858-76 - 轻型弹簧垫圈
Single coil spring lock washers,Light type
GB 859-87
| UDC 621.882.4 | 代替GB 859-76 - 鞍形弹性垫圈
Curved spring washers
GB 860-87
| UDC 621.882.4 | 代替GB 860-76 - 内齿锁紧垫圈
Lock washers internal teeth
GB 861.1-87
| UDC 621.882.4 | 代替GB 861-76 - 内锯齿锁紧垫圈
Serrated lock washers internal teeth
GB 861.2-87
| UDC 621.882.4 - 外齿锁紧垫圈
Lock washers external teeth
GB 862.1-87
| UDC 621.882.4 | 代替GB 862-76 - 外锯齿锁紧垫圈
Serrated lock washers external teeth
GB 862.2-87
| UDC 621.882.4 - 波形弹性垫圈
Wave spring washers
GB 955-87
| UDC 621.882.4 | 代替GB 955-76 - 锥形锁紧垫圈
Countersunk external toothed lock washers
GB 956.1-87
| UDC 621.882.4 | 代替GB 956-76 - 锥形锯齿锁紧垫圈
Countersunk Serrated external toothed lock washers
GB 956.2-87
| UDC 621.882.4 - 特大垫圈 C级
Plain washers-Extra large series-Product grade C
GB /T 5287-2002
| 代替GB /T 5287-1985 - 重型弹簧垫圈
Single coil spring lock washers,heavy type
GB 7244-87
| UDC 621.882.4 - 鞍形弹簧垫圈
Curved Single coil spring lock washers
GB 7245-87
| UDC 621.882.4 - 波形弹簧垫圈
Wave Single coil spring lock washers
GB 7246-87
| UDC 621.882.4
-
螺钉
- 开槽圆柱头螺钉
Slotted cheese head screws
GB /T 65-2000
| 代替GB /T 65-1985 - 开槽盘头螺钉
Slotted pan head screws
GB /T 67-2000
| 代替GB /T 67-1985 - 开槽沉头螺钉
Slotted countersunk flat head screws (common head style)
GB /T 68-2000
| 代替GB /T 68-1985 - 开槽半沉头螺钉
Countersunk slotted raised head screws (common head style)
GB /T 69-2000
| 代替GB /T 69-1985 - 内六角圆柱头螺钉
Hexagon socket head cap screws
GB /T 70.1-2000
| 代替GB /T 70-1985 - 内六角平圆头螺钉
Hexagon socket button head screws
GB /T 70.2-2000
- 内六角沉头螺钉
Hexagon socket countersunk head screws
GB /T 70.3-2000
- 开槽锥端紧定螺钉
Slotted set screws with cone point
GB 71-85
| UDC 621.882.219.4.092.5 | 代替GB 71-76 - 开槽锥端定位螺钉
Slotted setscrews with cone point
GB 72-88
| UDC 621.882.2 | 代替GB 72-76 - 开槽平端紧定螺钉
Slotted set screws with flat point
GB 73-85
| UDC 621.882.219.4 | 代替GB 73-76 - 开槽凹端紧定螺钉
Slotted set screws with cup point
GB 74-85
| UDC 621.882.219.4.092.6 | 代替GB 74-76 - 开槽长圆柱端紧定螺钉
Slotted set screws with long dog point
GB 75-85
| UDC 621.882.219.4.092.5 | 代替GB 75-76 - 内六角平端紧定螺钉
Hexagon socket set screws with flat point
GB /T 77-2000
| 代替GB /T 77-1985 - 内六角锥端紧定螺钉
Hexagon socket set screws with cone point
GB /T 78-2000
| 代替GB /T 78-1985 - 内六角圆柱端紧定螺钉
Hexagon socket set screws with dog point
GB /T 79-2000
| 代替GB /T 79-1985 - 内六角凹端紧定螺钉
Hexagon socket set screws with cup point
GB /T 80-2000
| 代替GB /T 80-1985 - 方头长圆柱球面端紧定螺钉
Square set screws with long dog point and rounded end
GB 83-88
| UDC 621.882.2 | 代替GB 83-76 - 方头凹端紧定螺钉
Square set screws with cup point
GB 84-88
| UDC 621.882.2 | 代替GB 84-76 - 方头长圆柱端紧定螺钉
Square set screws with long dog point
GB 85-88
| UDC 621.882.2 | 代替GB 85-76 - 方头短圆柱锥端紧定螺钉
Square set screws with short dog point and cone end
GB 86-88
| UDC 621.882.2 | 代替GB 86-76 - 十字槽盘头螺钉
Pan head screws with cross recess
GB /T 818-2000
| 代替GB /T 818-1985 - 十字槽沉头螺钉 第1部分：钢4.8级
Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8
GB /T 819.1-2000
| 代替GB /T 819-1985 - 十字槽沉头螺钉 第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3
Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals
GB /T 819.2-1997
- 十字槽半沉头螺钉
Countersunk raised head screws (common head style) with cross recess
GB /T 820-2000
| 代替GB /T 820-1985 - 方头平端紧定螺钉
Square set screws with chamfered end
GB 821-88
| UDC 621.882.2 | 代替GB 821-76 - 十字槽圆柱头螺钉
Cheese head screws with cross recess
GB /T 822-2000
| 代替GB /T 822-1988 - 十字槽小盘头螺钉
Cross recessed small pan head screws
GB 823-88
| UDC 621.882.2 | 代替GB 823-76 - 吊环螺钉
Eyebolts
GB 825-88
| UDC 621.882 | 代替GB 825-76 - 开槽盘头定位螺钉
Slotted pan head set setscrews with dog point
GB 828-88
| UDC 621.882.2 | 代替GB 828-76 - 开槽圆柱端定位螺钉
Slotted setscrews with dog point
GB 829-88
| UDC 621.882.2 | 代替GB 829-76 - 开槽圆柱头轴位螺钉
Slotted cheese head screws with shoulder
GB 830-88
| UDC 621.882.2 | 代替GB 830-76 - 开槽无头轴位螺钉
Slotted shoulder screws
GB 831-88
| UDC 621.882.2 | 代替GB 831-76 - 开槽带孔球面圆柱头螺钉
Slotted capstan screws
GB 832-88
| UDC 621.882.2 | 代替GB 832-76 - 开槽大圆柱头螺钉
Slotted large cheese head screws
GB 833-88
| UDC 621.882.2 | 代替GB 833-76 - 滚花高头螺钉
Knurled thumb screws
GB 834-88
| UDC 621.882.2 | 代替GB 834-76 - 滚花平头螺钉
Knurled screws
GB 835-88
| UDC 621.882.2 | 代替GB 835-76 - 滚花小头螺钉
Knurled screws with small head
GB 836-88
| UDC 621.882.2 | 代替GB 836-76 - 开槽盘头不脱出螺钉
Slotted pan head screws with waisted shank
GB 837-88
| UDC 621.882.2 | 代替GB 837-76 - 六角头不脱出螺钉
Hexagon screws with waisted shank
GB 838-88
| UDC 621.882.2 | 代替GB 838-76 - 滚花头不脱出螺钉
Knurled thumb screws with waisted shank
GB 839-88
| UDC 621.882.2 | 代替GB 839-76 - 塑料滚花头螺钉
Plastic diamond knurlhead screws
GB 840-88
| UDC 621.882.2 | 代替GB 840-79 - 开槽球面圆柱头轴位螺钉
Slotted raised head with shoulder
GB 946-88
| UDC 621.882.2 | 代替GB 946-76 - 开槽球面大圆柱头螺钉
Slotted large raised cheese head screws
GB 947-88
| UDC 621.882.2 | 代替GB 947-76 - 开槽沉头不脱出螺钉
Slotted countersunk head screws with waisted shank
GB 948-88
| UDC 621.882.2 | 代替GB 948-76 - 开槽半沉头不脱出螺钉
Slotted raised countersunk head screws with waisted shank
GB 949-88
| UDC 621.882.2 | 代替GB 949-76 - 内六角花形盘头螺钉
Hexagon lobular socket pan head screws
GB 2672-86
| UDC 621.882.2 | 代替GB 2672-81 - 内六角花形沉头螺钉
Hexagon lobular socket countersunk head screws
GB 2673-86
| UDC 621.882.2 | 代替GB 2673-81 - 内六角花形半沉头螺钉
Hexagon lobular socket raised countersunk head screws
GB 2674-86
| UDC 621.882.2 | 代替GB 2674-81 - 内六角圆柱头轴肩螺钉
Hexagon socket head shoulder screws
GB 5281-85
| UDC 621.882.215.6 - 内六角花形圆柱头螺钉-4.8级
Hexagon lobular socket head cap screws-property class 4.8
GB 6190-86
| UDC 621.882.2 | 代替GB 2671-81 - 内六角花形圆柱头螺钉-8.8和10.9级
Hexagon lobular socket head cap screws-property class 8.8 and 10.9
GB 6191-86
| UDC 621.882.2 | 代替GB 2671-81 - 精密机械用紧固件十字槽螺钉
Fasteners for mechanics-Cross recessed screws
GB /T 13806.1-92
-
螺母
- 方螺母 C级
Square nuts-product grade C
GB 39-88
| UDC 621.882.3 | 代替GB 39-76 - 六角螺母 C级
Hexagon nuts-product grade C
GB /T41-2000
| 代替GB /T 41-1986 - 六角厚螺母
Hexagon thick nuts
GB 56-88
| UDC 621.882.3 | 代替GB 56-76 - 蝶形螺母
Wing nuts
GB 62-88
| UDC 621.882.3 | 代替GB 62-76 - 环形螺母
Lifting nuts
GB 63-88
| UDC 621.882.3 | 代替GB 63-76 - 组合式盖形螺母
Acorn nuts
GB 802-88
| UDC 621.882.3 | 代替GB 802-76 - 球面六角螺母
Hexagon nuts with raised face
GB 804-88
| UDC 621.882.3 | 代替GB 804-76 - 扣紧螺母
Tight nuts
GB 805-88
| UDC 621.882.3 | 代替GB 805-76 - 滚花高螺母
Knurled nut with collar
GB 806-88
| UDC 621.882.3 | 代替GB806-76 - 滚花薄螺母
Knurled nuts
GB 807-88
| UDC 621.882.3 | 代替GB 807-76 - 小六角特扁细牙螺母
Small hexagon thin nuts-Fine pitch thread
GB 808-88
| UDC 621.882.3 | 代替GB 808-76 - 嵌装圆螺母
Lnsert round nuts
GB 809-88
| UDC 621.882.3 | 代替GB 809-76 - 小圆螺母
Small round nuts
GB 810-88
| UDC 621.882.3 | 代替GB810-76 - 圆螺母
Round nuts
GB 812-88
| UDC 621.882.3 | 代替GB 812-76 - 端面带孔圆螺母
Round nuts with drilled holes in one face
GB 815-88
| UDC 621.882.3 | 代替GB 815-76 - 侧面带孔圆螺母
Round nuts with set pin holes in side
GB 816-88
| UDC 621.882.3 | 代替GB 816-79 - 带槽圆螺母
Slotted round nuts
GB 817-88
| UDC 621.882.3 | 代替GB 817-76 - 1型非金属嵌件六角锁紧螺母
Prevailing torque type hexagon nuts(with non-metallic insert),style 1
GB /T 889.1-2000
| 代替GB /T 889-1986 - 1型非金属嵌件六角锁紧螺母 细牙
Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread
GB /T 889.2-2000
- 盖形螺母
Acorn nuts
GB 923-88
| UDC 621.882.3 | 代替GB 923-76 - 1型六角螺母
Hexagon nuts,style 1
GB /T 6170-2000
| 代替GB /T 6170-1986 - 1型六角螺母 细牙
Hexagon nuts,style 1,with fine pitch thread
GB /T 6171-2000
| 代替GB /T 6171-1986 - 六角薄螺母
Hexagon thin nuts(chamfered)
GB /T 6172.1-2000
| 代替GB /T 6172-1986 - 非金属嵌件六角锁紧薄螺母
Prevailing torque type hexagon thin nuts(with non-metallic insert)
GB /T 6172.2-2000
- 六角薄螺母 细牙
Hexagon thin nuts(chamfered) with fine pitch thread
GB /T 6173-2000
| 代替GB /T 6173-1986 - 六角薄螺母 无倒角
Hexagon thin nuts(unchamfered)
GB /T 6174-2000
| 代替GB /T 6174-1986 - 2型六角螺母
Hexagon nuts,style 2
GB /T 6175-2000
| 代替GB /T 6175-1986 - 2型六角螺母 细牙
Hexagon nuts,style 2,with fine pitch thread
GB /T 6176-2000
| 代替GB /T 6176-1986 - 六角法兰面螺母
Hexagon nuts with flange
GB /T 6177.1-2000
| 代替GB /T 6177-1986 - 六角法兰面螺母 细牙
Hexagon nuts with flange-fine pitch thread
GB /T 6177.2-2000
- 1型六角开槽螺母-A和B级
Hexagon slotted and castle nuts,style 1 -product grades A and B
GB 6178-86
| UDC 621.882.3 | 代替GB 57~58-76 - 1型六角开槽螺母-C级
Hexagon slotted nuts,style 1 -product grade C
GB 6179-86
| UDC 621.882.3 | 代替GB 57~58-76 - 2型六角开槽螺母-A和B级
Hexagon slotted and castle nuts,style 2 -Product grades A and B
GB 6180-86
| UDC 621.882.3 - 六角开槽薄螺母-A和B级
Hexagon thin slotted nuts-Product grades A and B
GB 6181-86
| UDC 621.882.3 | 代替GB 59~60-76 - 2型非金属嵌件六角锁紧螺母
Prevailing torque type hexagon nuts(with non-metallic insert),style 2
GB /T 6182-2000
| 代替GB /T 6182-1986 - 非金属嵌件六角法兰面锁紧螺母
Prevailing torque type hexagon nuts with flange(with non-metallic insert)
GB /T 6183.1-2000
| 代替GB /T 6183-1986 - 非金属嵌件六角法兰面锁紧螺母 细牙
Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread
GB /T 6183.2-2000
- 1型全金属六角锁紧螺母
Prevailing torque type all-metal hexagon nuts,style 1
GB /T 6184-2000
| 代替GB /T 6184-1986 - 2型全金属六角锁紧螺母
Prevailing torque type all-metal hexagon nuts,style 2
GB /T 6185.1-2000
| 代替GB /T 6185-1986 - 2型全金属六角锁紧螺母 细牙
Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread
GB /T 6185.2-2000
- 2型全金属六角锁紧螺母 9级
Prevailing torque type all-metal hexagon nuts,style 2-Property class 9
GB /T 6186-2000
| 代替GB /T 6186-1986 - 全金属六角法兰面锁紧螺母
Prevailing torque type all-metal hexagon nuts with flange
GB /T 6187.1-2000
| 代替GB /T 6187-1986 - 全金属六角法兰面锁紧螺母 细牙
Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread
GB /T 6187.2-2000
- 1型六角开槽螺母 细牙 A和B级
Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B
GB 9457-88
| UDC 621.882.3 | 代替GB 57、58-76（有关部分） - 2型六角开槽螺母 细牙 A和B级
Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B
GB 9458-88
| UDC 621.882.3 - 六角开槽薄螺母 细牙 A和B级
Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B
GB 9459-88
| UDC 621.882.3 | 代替GB 59、60-76（有关部分） - 焊接方螺母
Square weld nuts
GB /T 13680-92
- 焊接六角螺母
Hexagon weld nuts
GB /T 13681-92
- 平头铆螺母
Flat head riveted nuts
GB /T 17880.1-1999
- 沉头铆螺母
Countersunk head riveted nuts
GB /T 17880.2-1999
- 小沉头铆螺母
Small countersunk head riveted nuts
GB /T 17880.3-1999
- 120°小沉头铆螺母
120°Small countersunk head riveted nuts
GB /T 17880.4-1999
- 平头六角铆螺母
Flat head hexagon riveted nuts
GB /T 17880.5-1999
- 精密机械用六角螺母
Hexagon nuts for fine mechanics
GB /T 18195-2000
-
螺柱
- 双头螺柱 bm=1d
Double end studs-bm=1d
GB 897-88
| UDC 621.882 | 代替GB 897-76 - 双头螺柱 bm=1.25d
Double end studs-bm=1.25d
GB 898-88
| UDC 621.882 | 代替GB 898-76 - 双头螺柱 bm=1.5d
Double end studs-bm=1.5d
GB 899-88
| UDC 621.882 | 代替GB 899-76 - 双头螺柱 bm=2d
Double end studs--bm=2d
GB 900-88
| UDC 621.882 | 代替GB 900-76 - 等长双头螺柱 B级
Double end studs(clamping type) -Product grade B
GB 901-88
| UDC 621.882 | 代替GB 901-76 - 手工焊用焊接螺柱
Weld studs for manual welding
GB 902.1-89
| 代替GB 902-76 - 机动弧焊用焊接螺柱
Weld studs for arc welding
GB 902.2-89
| 代替GB 902-76 - 储能焊用焊接螺柱
Weld studs for capacitor discharge welding
GB 902.3-89
| 代替GB 902-76 - 等长双头螺柱 C级
Double end studs(clamping type)-product grade C
GB 953-88
| UDC 621.882 | 代替GB 953-76 - 螺杆
Threaded rods
GB /T 15389-94
-
焊钉
- 无头焊钉
Headless studs for stud welding
GB 10432-89
- 电弧螺柱焊用圆柱头焊钉
Cheese head studs for arc stud welding
GB/T 10433-2002
| 代替GB/T 10433-1989
|
金牌会员
GB国标
