-
焊接螺栓
-
双头螺柱和非直杆螺栓
- 双头螺柱
Double End Studs Bolts
IFI-136 2002
- 双头螺柱—过盈配合螺纹
Interference-Thread Double End Studs Bolts
IFI-136 2002
- 非直杆螺栓
Bent Bolts
IFI-136 2002
-
开槽螺钉
- 开槽沉头螺钉
Slotted Flat Countersunk Head Cap Screws
ASME B18.6.2 1998
- 开槽半圆头螺钉
Slotted Round Head Cap Screws
ASME B18.6.2 1998
- 开槽盘圆柱头螺钉
Slotted Fillister Head Cap Screws
ASME B18.6.2 1998
-
锁紧螺母
- 全金属六角和小六角锁紧螺母
Prevaliling-Torque Type Regular Hex and Light Hex Series Nuts
IFI-100/107 2002
- 全金属六角法兰面锁紧螺母
Prevailing-Torque Type Hex Flange Nuts
IFI-100/107 2002
-
机械螺栓用方螺母和六角螺母
- 机械螺栓用方螺母和六角螺母
Square and Hex Machine Screw Nuts
ANSI/ASME B18.6.3 1998
-
蝶型螺母
- A型碟形螺母
Type A Wing Nuts
ASME B18.6.x DRAFT STANDARD 2002
- B型碟形螺母
Type B Wing Nuts
ASME B18.6.x DRAFT STANDARD 2002
- C型碟形螺母
Type C Wing Nuts
ASME B18.6.x DRAFT STANDARD 2002
- D型碟形螺母
Type D Wing Nuts
ASME B18.6.x DRAFT STANDARD 2002
-
钢结构连接副
- 钢结构大六角螺栓
Heavy Hex Structural Bolts
ASME DRAFT Revision B18.2.6 2003
- 淬硬圆垫圈和缺圆（大半月亮型）垫圈
Hardened Stell Circular and Circular Clipped Washer
ASME DRAFT Revision B18.2.6 2003
- 淬硬方形斜垫圈和偏孔方形斜垫圈－锥度1:6
Hardened Beveled Washers with Slope or Taper in Thickness 1:6
ASME DRAFT Revision B18.2.6 2003
- 垫圈型直接拉力指示器
Washer-Type Direct Tension Indicators
ASME DRAFT Revision B18.2.6 2003
- 钢结构大六角螺栓
Heavy Hex Structral Bolts
ASME DRAFT Revision B18.2.6 2003
- 钢结构螺栓用大六角螺母
Heavy Hex Nuts for Use with Structural Bolts
ASME DRAFT Revision B18.2.6 2003
- 钢结构高强度螺栓用平垫圈和方斜垫圈
Washers for High Strength Structural Bolts
ASME DRAFT Revision B18.2.6 2003
- 最小抗拉强度为120/105ksi的热处理结构钢螺栓
Structural Bolts,Steel.Heat Treated,120/105 KSI Minimum Tensile Strength
ASTM A325 2002
- 可压缩垫圈型直接张力指示器
Compressible Washer-Type Direct Tension Indicators
ASME DRAFT Revision B18.2.6 2003
- 钢结构用大六角头和平圆头扭剪型高强度螺栓
Twist Off Type Tension Control Structural Bolts Heavy Hex Head and Round Head Configurations
ASME DRAFT Revision B18.2.6 2003
-
吊环螺栓
- 平型（直杆）吊环螺栓
Plain Pattern(Straight Shank) Eyebolts
ASME B18.15 1985(R 1995)
- 轴肩吊环螺栓
Shoulder Pattern Eyebolts
ASME B18.15 1985(R 1995)
-
方螺母和六角螺母
- 方螺母
Square Nuts
ASME/ANSI B18.2.2 1987(R 1999)
- 六角螺母和六角薄螺母（单倒角）
Hex Flat Nuts and Hex Flat Jam Nuts
ASME/ANSI B18.2.2 1987(R 1999)
- 六角螺母和六角薄螺母（双倒角或单面带垫圈面）
Hex Nuts and Hex Jam Nuts
ASME/ANSI B18.2.2 1987(R 1999)
- 开槽六角螺母
Hex Slotted Nuts
ASME/ANSI B18.2.2 1987(R 1999)
- 六角厚螺母
Hex Thick Nuts
ASME/ANSI B18.2.2 1987(R 1999)
- 开槽六角厚螺母
Hex Thick Slotted Nuts
ASME/ANSI B18.2.2 1987(R 1999)
- 大方螺母
Heavy Square Nuts
ASME/ANSI B18.2.2 1987(R 1999)
- 大六角螺母和大六角薄螺母（单倒角）
Heavy Hex Flat Nuts and Heavy Hex Flat Jam Nuts
ASME/ANSI B18.2.2 1987(R 1999)
- 大六角螺母和大六角薄螺母
Heavy Hex Nuts and Heavy Hex Jam Nuts
ASME/ANSI B18.2.2 1987(R 1999)
- 开槽大六角螺母
Heavy Hex Slotted Nuts
ASME/ANSI B18.2.2 1987(R 1999)
-
六角特厚螺母
- 六角特厚螺母
Hex Coupling Nuts
IFI-128 2000
-
轨道螺栓用螺母
-
六角法兰螺母和大六角法兰螺母
- 六角法兰面螺母
Hex Flange Nuts
IFI-145 2002
-
爆裂扩口结构自封闭式抽芯盲铆钉
- 平圆头和大平圆头爆裂扩口结构自封闭式抽芯盲铆钉
Regular and Large Head Structural Splitting Self-Plugging Pull Mandrel Blind Rivets
IFI-130 2003
- 100°沉头爆裂扩口结构自封闭式抽芯盲铆钉
100 Degree Countersunk Head Structural Splitting Self-Plugging Pull Manbdrel Blind Rivets
IFI-130 2003
-
空心铆钉，全空心铆钉，开口铆钉和铆钉帽
- 扁圆头半空心铆钉
Oval Head Semi-Tubular Rivets
ASME B18.7 1972(R 2001)
- 大扁圆头半空心铆钉
Truss Head Semi-Tubular Rivets
ASME B18.7 1972(R 2001)
- 150°沉头半空心铆钉
150 Degree Flat Countersunk Head Semi-Tubular Rivets
ASME B18.7 1972(R 2001)
- 120°沉头半空心铆钉
120 Degree Flat Countersunk Head Semi-Tubular Rivets
ASME B18.7 1972(R 2001)
- 铆钉型式与尺寸
Full Tubular Rivets
ASME B18.7 1972(R 2001)
- 扁圆头和沉头开口铆钉
Oval Head and Flat Countersunk Head Split Rivets
ASME B18.7 1972(R 2001)
- 铆钉帽
Rivet Caps
ASME B18.7 1972(R 2001)
-
芯杆拉断式抽芯盲铆钉
- 芯杆拉断式抽芯铆钉
Break Mandrel Blind Rivets
IFI-114 2003
-
芯杆拉出式抽芯盲铆钉
- 半圆头和大半圆头芯杆拉出式抽芯盲铆钉
Regular and Large Dome Head Pull Through Mandrel Blind Rivets
IFI-117 2003
- 100°沉头芯杆拉出式抽芯盲铆钉
100 Degree Countersunk Head Pull Through Mandrel Blind Rivets
IFI-117 2003
-
膨胀结构自封闭抽芯盲铆钉
- 半圆头和大半圆头膨胀结构自封闭式抽芯盲铆钉
Regualr and Large Dome Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
IFI-119 2003
- 100°和120°沉头膨胀结构自封闭式抽芯盲铆钉
100 Degree and 120 Degree Countersunk Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
IFI-119 2003
-
击芯盲铆钉
- 平圆头击芯盲铆钉
Dome Head Drive Pin Blind Rivets
IFI-123 2003
- 沉头击芯盲铆钉
Countersunk Head Drive Pin Blind Rivets
IFI-123 2003
-
芯杆拉断式封闭型抽芯盲铆钉
- 平圆头芯杆拉断式封闭型抽芯盲铆钉
Dome Head Style Break Mandrel Closed End Blind Rivets
IFI-126 2003
- 120°沉头芯杆拉断式封闭型抽芯盲铆钉
120 Degree Countersunk Head Style Break Mandrel Closed End blind Rivets
IFI-126 2003
-
圆锥销，圆柱销，槽销，和弹性销
- 圆锥销
Taper Pins
ASME B18.8.2 2000
- 圆柱销－精制
Dowel Pins
ASME B18.8.2 2000
- 圆柱销－粗制
Straight Pins
ASME B18.8.2 2000
- 槽销
Grooved Pins
ASME B18.8.2 2000
- 半圆头击打用槽销
Round Head Grooved Drive Studs
ASME B18.8.2 2000
- T形头槽销
Grooved T-Head Cotter Pins
ASME B18.8.2 2000
- 开槽式弹性圆柱销
Slotted Type Spring Pins
ASME B18.8.2 2000
- 卷制弹性圆柱销
Coiled-Type Spring Pins
ASME B18.8.2 2000
-
销轴和开口销
- 销轴
Clevis Pins
ASME B18.8.1 1994 (R 2000)
- 开口销
Cotter Pins
ASME B18.8.1 1994 (R 2000)
-
淬硬钢垫圈
- 淬硬钢垫圈
Hardened Steel Washers
Abstract Of ASTM F436 1993(R 2000)
-
锁紧垫圈
- 弹簧垫圈
Regular Helical Spring Lock Washers
ASME B18.21.1 1999
- 重型弹簧垫圈
Heavy Helical Spring Lock Washers
ASME B18.21.1 1999
- 特重型弹簧垫圈
Extra-Duty Helical Spring Lock Washers
ASME B18.21.1 1999
- 轻型弹簧垫圈
Hight-Collar Helical Spring Lock Washers
ASME B18.21.1 1999
- 内锯齿弹性锁紧垫圈
Intelnal Tooth Lock Washers
ASME B18.21.1 1999
- 外锯齿弹性锁紧垫圈
External Tooth Lock Washers
ASME B18.21.1 1999
- 内外锯齿弹性锁紧垫圈
Internal-External Tooth Lock Washers
ASME B18.21.1 1999
-
平垫圈
- 平垫圈
Plain Washers
ASME B18.22.1 1965(R 1998)
-
芯杆拉断式膨胀结构自封闭组合式抽芯盲铆钉
-
小规格实心铆钉（公称直径小于或等于7/16英寸）
- 平头和沉头铆钉
Flat Head Rivest and Flat Countersunk Head Rivets
ASME B18.1.1 1972(R 2001)
- 半圆头和平圆头铆钉
Button Head Rivets and Pan Head Rivets
ASME B18.1.1 1972(R 2001)
- 大扁圆头和扁平头铆钉
Truss Head Rivets and Thinners Rivets
ASME B18.1.1 1972(R 2001)
- 144°扁沉头铆钉
Cooper Rivets
ASME B18.1.1 1972(R 2001)
- 144°扁沉头和60°沉头铆钉
Belt Rivets And 60-Degrees Flat Countersunk Head Rivets
ASME B18.1.1 1972(R 2001)
- 小规格实心铆钉末端
Standard Header Points for Small Solid Rivets
ASME B18.1.1 1972(R 2001)
-
大规格铆钉(公称直径大于或等于1/2英寸)
- 半圆头铆钉
Button Head Rivets
ASME B18.1.2 1972(R 2001)
- 高半圆头铆钉
High Button Head(Acorn) Rivets
ASME B18.1.2 1972(R 2001)
- 截锥头铆钉
Cone Head Rivets
ASME B18.1.2 1972(R 2001)
- 沉头铆钉
Flat Countersunk Head Rivets
ASME B18.1.2 1972(R 2001)
- 半沉头铆钉
Oval Countersunk Head Rivets
ASME B18.1.2 1972(R 2001)
- 平圆头铆钉
Pan Head Rivets
ASME B18.1.2 1972(R 2001)
- 粗颈铆钉
Swell-Neck Rivets
ASME B18.1.2 1972(R 2001)
-
小螺钉
- 开槽圆柱头小螺钉
Slotted Fillister Head Miniature Screws
ASME B18.11 1961(R 2000)
- 开槽平圆头小螺钉
Slotted Pan Head Miniature Screws
ASME B18.11 1961(R 2000)
- 开槽100°沉头小螺钉
Slotted 100 Degree Flat Head Miniature Screws
ASME B18.11 1961(R 2000)
- 开槽低圆柱头小螺钉
Slotted Binding Head Miniature Screws
ASME B18.11 1961(R 2000)
-
六角法兰面螺栓
- 六角法兰面螺栓
Hex Flange Screws
IFI-111 2002
-
12角花形法兰面螺钉
-
圆形头螺栓
- 半圆头螺栓
Round Head Bolts
ASME B18.5 1990(R 1998)
- 半圆头方颈螺栓
Round Head Square Neck Bolts
ASME B18.5 1990(R 1998)
- 大半圆头低方颈螺栓
Round Head Short Square Neck Bolts
ASME B18.5 1990(R 1998)
- 大半圆头杆部滚花螺栓
Round Head Ribbed Neck Bolts
ASME B18.5 1990(R 1998)
- 大半圆头螺栓－带尖榫
Round Head Fin Neck Bolts
ASME B18.5 1990(R 1998)
- 大半圆头方颈螺栓
Step Bolts
ASME B18.5 1990(R 1998)
- 沉头螺栓和开槽沉头螺栓
Contersunk Bolts and Slotted countersunk Bolts
ASME B18.5 1990(R 1998)
- 114°沉头方颈螺栓
114 Degree Countersunk Square Neck Bolts
ASME B18.5 1990(R 1998)
- 大沉头方颈螺栓
Flat Countersunk Head Elevator Bolts
ASME B18.5 1990(R 1998)
- T形头螺栓
T-Head Bolts
ASME B18.5 1990(R 1998)
-
沉头螺栓
- 3#沉头方颈螺栓
No.3 Head Plow Bolts(Round,Countersunk,Square Neck)
ASME B18.9 1996
- 7#沉头方颈螺栓
No.7 Head Plow Bolts(Round,Countersunk,Reverse Key)
ASME B18.9 1996
- 4#方沉头螺栓
No.4 Repair Head Plow Blots(Square Head,Countersunk)
ASME B18.9 1996
- 6#圆沉头带单尖榫螺栓
No.6 Repair Head Plow Bolts(Square Head,Heavy Key)
ASME B18.9 1996
- 4#标准方型沉头螺栓
No.4 Regular Head Plow Blots(Square Head,Countersunk)
ASME B18.9 1996
- 6#标准方型沉头带单尖榫螺栓
No.6 Regular Head Plow Blots(Square Head,Heavy Key)
ASME B18.9 1996
-
轨道螺栓
- 半圆头腰状颈轨道用螺栓
Oval Neck Track Bolts
ANSI/ASME B18.10 1982(R 2000)
- 半圆头椭圆锥颈轨道用螺栓
Elliptic Neck Track Bolts
ANSI/ASME B18.10 1982(R 2000)
-
方头和六角头螺栓
- 方头螺栓
Square Bolts
ASME B18.2.1 1996
- 六角头螺栓
Hex Bolts
ASME B18.2.1 1996
- 六角头垫圈面螺栓
Hex Cap Screws
ASME B18.2.1 1996
- 大六角头垫圈面螺栓
Heavy Hex Screws
ASME B18.2.1 1996
- 大六角头螺栓
Heavy Hex Bolts
ASME B18.2.1 1996
- 方头和六角头螺栓
Square and Hex Lag Screws
ASME B18.2.1 1996
-
内六角和内花键螺钉
- 内六角和内花键圆柱头螺钉
Hexagon and Spline Socket Head Cap Screws
ASME B18.3 2002
- 内六角圆柱头螺钉－头下带圆角过渡
Underhead Fillets for Socket Head Cap Screws
ASME B18.3 2002
- 内六角圆柱头螺钉－头部带金属丝孔
Drilled Hexagon Socket Head Cap Screws
ASME B18.3 2002
- 内六角低圆柱头螺钉
Low Head Hexagon Socket Cap Screws
ASME B18.3 2002
- 内六角和内花键沉头螺钉
Hexagon and Spline Socket Flat Countersunk Head Cap Screws
ASME B18.3 2002
- 内六角和内花键盘头螺钉
Hexagon and Spline Socket Button Head Cap Screws
ASME B18.3 2002
- 内六角圆柱头轴肩螺钉
Hexagon Socket Head Shoulder Screws
ASME B18.3 2002
- 内六角和内花键紧定螺钉
Hexagon and Spline Socket Set Screws
ASME B18.3 2002
- 内六角型式与尺寸
Hexagon Socket
ASME B18.3 2002
- 内花键型式与尺寸
Spline Sockets
ASME B18.3 2002
- 内六角扳拧工具
Hexagon Keys and Bits
ASME B18.3 2002
- 内花键扳拧工具
Spline Keys and Bits
ASME B18.3 2002
- 内六角用量具
Gages for Hexagon Sockets
ASME B18.3 2002
- 内花键用量具
Gages for Spline Sockets
ASME B18.3 2002
- 内六角和内花键圆柱头螺钉用通孔和沉孔
Drill and Counterbore Size for Socket Head Cap Screws
ASME B18.3 2002
-
自攻螺钉
- 自攻螺钉和自钻自攻螺钉型式与标记
Tapping Screws and Metallic Drive Screws
Abstract of ASME B18.6.4 1998
- AB型自攻螺钉用螺纹和末端
Threads and Points for Type AB Thread Forming Tapping Screws
Abstract of ASME B18.6.4 1998
- B和BP型自攻螺钉用螺纹和末端
Threads and Points for Types B and BP Thread Forming Tapping Screws
Abstract of ASME B18.6.4 1998
- BF和BT型自攻螺钉用螺纹和末端
Threads and Points for Types BF and BT Thread Cutting Tapping Screws
Abstract of ASME B18.6.4 1998
- D,F,G和T型自攻螺钉用螺纹和末端
Threads and Points for Types D,F,G, and T Thread Cutting Tapping Screws
Abstract of ASME B18.6.4 1998
- 开槽沉头自攻螺钉
Slotted Flat Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 十字槽沉头自攻螺钉
Cross Recessed Flat Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 开槽低沉头自攻螺钉
Slotted Undercut Flat Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 十字槽低沉头自攻螺钉
Cross Recessed Undercut Flat Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 十字槽沉头自攻螺钉
Cross Recessed Flat Countersunk Rtim Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 开槽半沉头自攻螺钉
Slotted Oval Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 自攻螺钉用十字槽半沉头型式与尺寸
Cross Recessed Oval Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 自攻螺钉用开槽低半沉头型式与尺寸
Slotted Undercut Oval Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 自攻螺钉用十字槽低半沉头型式与尺寸
Cross Recessed Undercut Oval Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 十字槽半沉头自攻螺钉
Heads of Oval Countersunk Trim Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 自攻螺钉用十字槽I型小半沉头型式与尺寸
Type I Cross Recessed Oval Countersunk Trim Head Tapping Screws:Long Screw with Shoulder and Short Screws
Abstract of ASME B18.6.4 1998
- 自攻螺钉用十字槽IA型小半沉头型式与尺寸
Type IA Cross Recessed Oval Countersunk Trim Head Tapping Screws:Long Screws with Shoulder and Short Screws
Abstract of ASME B18.6.4 1998
- 自攻螺钉用十字槽II型小半沉头型式与尺寸
Type II Cross Recessed Oval Countersunk Trim Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 开槽平圆头自攻螺钉
Slotted Pan Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 自攻螺钉用十字槽平圆头型式与尺寸
Cross Recessed Pan Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 开槽球面圆柱头自攻螺钉
Slotted Fillister Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 自攻螺钉用十字槽盘头型式与尺寸
Cross Recessed Fillister Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 标准六角头和大六角头自攻螺钉
Regular and Large Hex Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 六角凸缘头自攻螺钉
Hex Washer Head Tapping Screws
Abstract of ASME B18.6.4 1998
- 十字槽测深用I型测量头型式与尺寸
Type I Gage Points
Abstract of ASME B18.6.4 1998
- 十字槽测深用IA型测量头型式与尺寸
Type IA Gage Points
Abstract of ASME B18.6.4 1998
- 十字槽II型测深装置及测量头型式与尺寸
Type II Gage Points
Abstract of ASME B18.6.4 1998
- 自攻螺丝用C型螺纹（新产品不推荐采用）
Type C Thread Forming Tapping Screws
Abstract of ASME B18.6.4 1998
- 自攻螺钉用沉头和小半沉头型式和尺寸
Flat and Oval Countersunk Trim Head Screws
Abstract of ASME B18.6.4 1998
- A,AB和BP型开槽平圆头自攻螺钉
Types A,AB and BP Tapping Screws
Abstract of ASME B18.6.4 1998
- 圆头U型金属传动螺钉
Round Head Type U Metallic Drive Screws
Abstract of ASME B18.6.4 1998
- BSD和CSD型自钻自攻螺钉用螺纹及末端尺寸
Self-Drilling Tapping Screws
Abstract of ASME B18.6.4 1998
-
机械螺钉
- 开槽沉头螺钉
Slotted Flat Countersunk Head Nachine Screws
Draft Revision ASME B18.6.3 2002
- 沉头螺钉用十字槽型式与尺寸
Cross Recessed Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 十字槽沉头螺钉
Square Recessed Type III Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽100°沉头螺钉
Slotted 100 Degree Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 100°沉头螺钉用十字槽型式与尺寸
Cross Recessed 100 Degree Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽100°沉头精密螺钉
Slotted Close Tolerance 100 Degree Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 100°沉头精密螺钉用十字槽型式与尺寸
Cross Recessed Close Tolerance 100 Degree Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽半沉头螺钉
Slotted Oval Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 半沉头螺钉用十字槽型式与尺寸
Cross Reccessed Oval Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- III型方槽半沉头螺钉
Square Recessed Type III Oval Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽低沉头螺钉
Slotted Undercut Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 低沉头螺钉用十字槽型式与尺寸
Cross Recessed Undercut Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- III型方槽低半沉头螺钉
Squeare Recessed Type III Undercut Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽低半沉头螺钉
Slotted Undercut Oval Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 低半沉头螺钉用十字槽型式与尺寸
Cross Recessed Undercut Oval Cpuntersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 小沉头螺钉用十字槽型式与尺寸
Flat Countersunk Trim Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 十字槽小沉头螺钉
Cross Recessed Flat Countersunk Trim Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 十字槽小半沉头螺钉
Cross Recessed Oval Countersunk Trim Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽平圆头螺钉
Slotted Pan Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 盘头螺钉用十字槽型式与尺寸
Cross Recessed Pan Head Machine Screws
Draft Revision ASME B18.6.3 2002
- III型方槽和复合槽（方槽和开槽）盘头螺钉
Square Recessed Type III Pan Head Machine Screws(Optionally Slotted)
Draft Revision ASME B18.6.3 2002
- 十字槽复合槽（开槽和I 型、IA型十字槽）盘头螺钉
Slotted-Type I and Type IA Cross Recessed Pan Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽球面圆柱头螺钉
Slotted Fillister Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 螺钉用十字槽球面圆柱头型式与尺寸
Cross Recessed Fillister Head Machine Screws
Draft Revision ASME B18.6.3 2002
- III型方槽球面圆柱头螺钉
Square Recessed Type III Fillister Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽头部带孔球面圆柱头螺钉
Slotted Drilled Fillister Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽大扁圆头螺钉
Slotted Truss Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 大扁圆头螺钉用十字槽型式与尺寸
Cross Recessed Truss Head Machine Screws
Draft Revision ASME B18.6.3 2002
- III型方槽和方槽复合槽（方槽与开槽）大扁圆头螺钉
Square and Square Slotted Type III Recessed Truss Head Machine Screws
Draft Revision ASME B18.6.3 2002
- I型十字槽复合槽（开槽和I型十字槽）大扁圆头螺钉
Combination Slotted and Cross Recessed Type I Truss Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽球面圆锥头螺钉
Slotted Binding Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 球面圆锥头螺钉用十字槽型式与尺寸
Cross Recessed Binding Head Machine Screws
Draft Revision ASME B18.6.3 2002
- III型方槽球面圆锥头螺钉
Square Recessed Type III Binding Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽大六角头和凹穴大六角头螺钉
Plain(Unslotted) and Slotted Regular and Large Hex Head Machine Screws
Draft Revision ASME B18.6.3 2002
- I型十字槽大六角头和凹穴大六角头螺钉
Type I Cross Recessed Indented and Nonindented Regular and Large Hex Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽凹穴六角凸缘头螺钉
Plain(Unslotted) and Slotted Hex Washer Head Macxhine Screws
Draft Revision ASME B18.6.3 2002
- I型十字槽凹穴六角凸缘头螺钉
Cross Recessed Type I Indented Hex Washer Head Machine Screws(Slot Optional)
Draft Revision ASME B18.6.3 2002
- I型十字槽半圆头大凸缘面螺钉
Cross Recessed Type I Round Washer Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 开槽半圆头螺钉
Slotted Round Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 螺钉用十字槽半圆头型式与尺寸
Cross Recessed Round Head Machine Screws
Draft Revision ASME B18.6.3 2002
- 半圆头螺钉用I型、IA型十字槽和III型方槽型式与尺寸
Cross Recessed With Slot for Types I and IA and Type III Round Head Machine Screws
Draft Revision ASME B18.6.3 2002
-
方头和开槽无头调整螺钉
- 方头调整螺钉
Square Head Set Screws
ASME B18.6.2 1998
- 开槽无头调整螺钉
Slotted Headless Set Screws
ASME B18.6.2 1998
- 内六角圆柱头螺钉与弹簧垫圈组合件
Socket Head Cap Screw
ASME B18.6.2 1998
-
翼形螺钉
- A型翼形螺钉
Type A,Regular Thumb Screws
IFI-156 2002
- A型大翼形螺钉
Type A,Heavy Thumb Screws
IFI-156 2002
- B型翼形螺钉
Type B,Regular Thumb Screws
IFI-156 2002
- B型大翼形螺钉
Type B,Heavy Thumb Screws
IFI-156 2002
- A型双翼形螺钉
Type A,Wing Screws
IFI-156 2002
- B型1类双翼形螺钉
Type B,Style 1 Wing Screws
IFI-156 2002
- B型2类双翼形螺钉
Type B,Style 2 Wing Screws
IFI-156 2002
- C型1类双翼形螺钉
Type C,Style 1 Wing Screws
IFI-156 2002
- C型2类双翼形螺钉
Type C,Style 2 Wing Screws
IFI-156 2002
- D型双翼形螺钉
Type D,Wing Screws
IFI-156 2002
- 翼形螺钉末端型式
Alternate Styles of Points for Thumb and Wing Screws
IFI-156 2002
-
木螺钉
- 木螺钉螺纹及公称直径
Threads and Body Diameters for Wood Screws
ASME B18.6.1 1981(R 1997)
- 开槽沉头木螺钉
Slotted Flat Countersunk Head Wood Screws
ASME B18.6.1 1981(R 1997)
- 十字槽沉头木螺钉
Cross Recessed Flat Countersunk Head Wood Screws
ASME B18.6.1 1981(R 1997)
- 开槽半沉头木螺钉
Slotted Oval Countersunk Head Wood Screws
ASME B18.6.1 1981(R 1997)
- 十字槽半沉头木螺钉
Cross Recessed Oval Countersunk Head Wood Screws
ASME B18.6.1 1981(R 1997)
- 开槽盘头木螺钉
Slotted Pan Head Wood Screws
ASME B18.6.1 1981(R 1997)
- 十字槽盘头木螺钉
Cross Recessed Pan Head Wood Screws
ASME B18.6.1 1981(R 1997)
-
大六角头螺栓
|
金牌会员
